Dji Video Transmitter

Broadcast high definition video over 3 miles (line of sight) from your DJI drone or gimbal gear with this wireless DJI video transmitter. The transmitter pairs with a separately available monitor / receiver and transmits video up to 1080p60 using highly efficient O3 Pro transmission technology over 2.4 and 5 GHz Wi-Fi frequencies. Optional high-gain antennas can be purchased to increase the signal quality and distance.

The transmitter supports automatic frequency hopping to find the strongest signal and works using AES 256 encryption to protect your video from prying eyes. It allows you to transmit to two receivers at the same time in control mode and, in broadcast mode, it can transmit to an unlimited number of receivers with slightly lower performance. The transmitter can be powered via an optional L-series battery or its DC power input, or it can be powered directly from a DJI gimbal such as the Ronin 2 or RS 3.

Long distance HD live feed
DJI Transmission incorporates O3 Pro video transmission technology, which offers an incredible ground transmission distance of 20,000 feet. It also supports 1080p60 transmission with a maximum bitrate of 50 Mb / s, as well as live audio monitoring at 16-bit at 48kHz, providing teams on large sets with an excellent remote visual and audio monitoring experience.

End-to-end ultra-low latency
The video transmitter and receiver use the same chip solution as Ronin 4D, with each link explicitly optimized to provide extremely low end-to-end transmission latency when paired with cinema cameras such as ARRI ALEXA Mini LF.

Automatic frequency hopping without interruption
O3 Pro adds a DFS band in addition to the traditional 2.4 and 5.8 GHz, offering up to 23 channel options that provide professional crews with more compliant and interference-free transmission channels.
DJI Transmission supports automatic triple band frequency hopping, which automatically scans the electromagnetic environment for the best wireless channel.
With a built-in frequency sweeper, users can even manually select a channel to avoid interference between devices.
By mounting high gain antennas, the transmission capacity is further enhanced.

A transmitter with several receivers for coordinated shooting
There are two transmission modes available.
In control mode, DJI Transmission offers optimal transmission performance. Monitoring can be done by two receivers simultaneously, while the Ronin 2 and RS 3 Pro gimbal and camera can be controlled remotely.
The transmission mode can be enabled in addition to the control mode to enable an unlimited number of receivers (the transmission performance differs from the control mode).
On larger, more dynamic devices, DJI Transmission can work with 20 or more transmitters sending signals to 20 or more devices, providing a smooth, coordinated experience that's difficult to achieve with traditional transmission setups.

Encrypted transmission
DJI Transmission supports connection and AES 256-bit encryption to prevent leaks of confidential information. Together with DJI's self-developed chip and transmission protocol, DJI Transmission is able to ensure the safety of your footage.

In the box
DJI wireless video transmitter
1 year limited warranty

I/O
Antenna ports: 2 x RP-SMA female
video: 1 x BNC input (3G-SDI)
1 x HDMI Type A Input (HDMI 1.4)
1 x BNC loop out (3G-SDI)
Built-in audio: HDMI / SDI
Power I / O
1 x USB Type-C input
1 x barrel entrance
Encryption: AES 256-bit
wireless
Wireless range: 3.7 miles / 6km (line of sight)
No. of channels: 23
Channel band: 40MHz
Frequency range: Non-DFS frequencies
2.4 to 2.48 GHz from
5.15 to 5.25 GHz from
5.72 to 5.85 GHz
DFS frequencies
5.25 to 5.35 GHz from
5.47 to 5.6 GHz from
5.65 to 5.72 GHz
Latency: 68 ms
RF power: <33 dBm
Wifi
Wi-Fi 5 (802.11ac); Dual band (2.4 and 5 GHz)
Format support
Video format
HDMI / SDI (10 bit 4: 2: 2 YCC)
1080p: 60 / 59.94 / 50/30/25/24 / 23.98
1080i: 60 / 59.94 / 50
720p: 60 / 59.94 / 50
Audio format: 16-bit 48kHz PCM audio
Wireless video compression: compressed
Power
DC input power: 6 to 18V DC
Battery Type: 1 x L Series (Interchangeable Mount)
Power Consumption: 11W
Assembly
Assembly: 1 cold shoe
Environmental
IP classification: None
Certifications: CE, FCC, as per Manufacturer
operating temperature: 14 to 113 ° F / -10 to 45 ° C
General
Size: 5 x 3.4 x 1 "/ 127 x 87 x 26mm
The weight: 12.3 ounces / 350g