Pantograph Top 4C
The pantograph is made of aluminium (P-Al MgSi UNI 3569) and manufactured according to DIN 15560-46.
The attachments at both ends of the pantograph are 16mm, male on the bottom and female on the top.
The load is supported by a steel cable of 2mm. diameter (safety factor 12). Loads up to 12Kg can be suspended using only the patented friction device, while loads up to a maximum of 18kg require the use of the optional springs.
The pantograph can be regulated to keep suspended loads from 1 to 18kg perfectly balanced. By turning the coulored notched ring you can adjust the pantograph's friction; this will ensure that the load remains stable when set in position, but that it will move smoothly up and down when necessary

Pantograph Top 4C
SPECIFICATIONS
attachment 1/4'' and retractable 3/8'' screw attachment type
attachment number 16mm socket attachment type
closed length 38 cm
material aluminum
maximum extension 380
Product - Width 150 mm
safety payload 18 kg
Weight 8.500 kg