STEREO/MONO CAMERA-MOUNT MICROPHONE

Designed for use with DSLR and other video cameras
Delivers dramatically better sound quality than the camera's internal mic
Selectable line-cardioid mono or mid-side stereo modes
Three-position adjustable input pad and switchable low-frequency roll-off
Integral rubber shock mounts for vibration and mechanical noise isolation
Compact, lightweight design with integral shoe mount
Designed for use with DSLR and other video cameras
Delivers dramatically better sound than built in camera mics
Selectable stereo or mono modes
Three-position adjustable input pad
Switchable low-frequency roll-off
Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
Integral shoe mount and 3.5mm stereo jack for easy application

Audio-Technica AT8035 specs
Transducer Fixed-Charged, Back Plate, Permanently Polarized Condenser
Polar Pattern Line + Gradient
Frequency Response 40 Hz to 20 kHz
Low Frequency Roll-Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity Phantom: -38 dB (12.5 mV) re 1 V at 1 Pa
Battery: -39 dB (11.2 mV) re 1 V at 1 Pa
Impedance Phantom: 250 ohms
Battery: 300 ohms
Max Input Sound Level (SPL) Phantom: 132 dB SPL, 1 kHz at 1% THD
Battery: 120 dB SPL, 1 kHz at 1% THD
Dynamic Range (Typical) Phantom 110 dB, (1 kHz @ maximum SPL)
Battery 98 dB, (1 kHz @ maximum SPL)
Signal-to-Noise Ratio 72 dB, (1 kHz @ 1Pa / A-Weighted)
Phantom Power Requirements 11 to 52 VDC
Battery AA (1.5v)
Battery Type AA/UM3: 1.5 V
Battery Current 0.4 mA / 1200 hours typical (alkaline)
Output Connectors XLR-3M Type
Switch Flat, Roll-Off
Dimensions (LxDiameter) 14.53 x 0.83" (369 X 21mm)
Weight 6.0 oz. (170 g)
Packaging Info
Package Weight 1.8 lb
Box Dimensions (LxWxH) 19.5 x 4.6 x 2.5"