Zacuto Z-FIND-PRO232 Z-Finder Pro 2.5x for 3.2" Screens
Zacuto
Z-Finder Pro 2.5x for 3.2" Screens
Accessoires
Souvent achetés ensemble
The Z-Finder Pro 2.5x for 3.2" screens is our standard Z-Finder Pro 2.5x packaged with a Z-Finder 3.2" Mounting Frame for Small Body DSLRs. This frame is compatible with small body cameras with 3.2" screens like the Canon 5D Mark IV and Mark III and the Nikon D800. This is not a new Z-finder.
The Z-Finder Pro 2.5x for 3.2" screens is an optical viewfinder that allows DSLR cameras to have the correct form factor for video. This Z-finder will magnify the LCD screen by 2.5x and has a diopter for specific focus tuning. It cuts out any extraneous light and offers an initial point of stability by pressing your eye against our comfy, large eyecup. The Z-finder Pro 2.5x for 3.2" screens comes with a 40mm diameter Zacuto optical designed lens, anti-fog coated protective covers, and a mounting system designed for 3.2" LCD screens. The diopter allows you to dial in the focus to match your eye. If you need extra focal points you can use the included Z-Finder Extender Frames. These are semi-permanent stackable frames that attach to the body of the Z-Finder Pro and extend the Z-Finder glass further away from the LCD screen for people who are farsighted.
The 2.5x magnification is recommended in particular for users who are near sighted and may have problems seeing long distances. The Z-Finder Pro 2.5x for 3.2" screens has a diopter range of -4.75 and up (unlimited with extender frames). This is the model we use with our electronic viewfinder packages.
The Z-Finder Pro attaches to your camera with the included Gorilla Plate V2 and Z-Finder 3.2" Mounting Frame for Small DSLR Bodies. (The Z-Finder Mounting Frame can also be attached to our Mini DSLR Baseplate. ) The Gorilla Plate V2 attaches to the bottom of your camera using a ¼ 20" screw and has ¼ 20" screw holes underneath to attach a tripod plate. The metal Z-Finder Mounting Frame attaches to the Gorilla Baseplate using the provided red thumb screws. The Z-finder itself pops on and off the Z-finder Mounting frame. No magnets or glue are used. The metal Z-Finder Mounting Frame is backed with rubber to prevent scratching or slippage. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release.
PLEASE NOTE
1. All Z-finder bodies are the same size and can fit on any of our frames. The Z-Finder Pro 2.5x for 3.2" screens comes standard with a 3.2" Z-Finder Mounting Frame for Small DSLR Bodies. That will fit a standard small body DSLR with a 3.2" screen like the Canon 5D MIII or Nikon D800/600. Any other frames need to be purchased in addition to the Z-Finder. You can find a la carte frames for tall cameras, battery grips, 3" LCD screens, and our adhesive frame here. You can find a Z-finder Pro 2.5x packaged with a mounting frame for small body DSLRs with 3" LCD screens (Canon 5D MII/7D/550D, Nikon D5100/3000) here.
2. The tapped holes on the bottom of the Gorilla Plate V2 are offset from the center of the lens for use with some of our equipment. This is only a concern if you are using the Gorilla plate with other rigs that do not have side to side movement and need the matte box in line with the lens/mounting screw hole. To compensate for this issue, you can either use an adhesive mounting frame to attach the Z-finder or add a Gorilla Plate Adapter to your plate. Our Gorilla Plate Adapter centers the tripod holes on the bottom of the gorilla plate. Please note that this adapter does come with a longer 1/4 20" screw that will replace the smaller 1/4 20" screw that comes with the Gorilla Plate. You will need to take your screw out and use the longer one provided with the adapter to attach your camera to the plate.
3. In order for the Gorilla Plate and mounting frame to correctly align with the LCD screen the plate needs to be directly underneath your camera. This means it cannot be used in combination with L brackets like Really Right Stuff or camera specific contour plates like Arca Swiss. You can use an adhesive frame on your camera with our Z-finder and continue using your camera specific plates as usual.
The Z-Finder Pro 2.5x for 3.2" Screens includes:
Z-Finder Pro loupe with 2.5x magnification and diopter
Three (3) Extender Frames
Gorilla Plate V2 and 3.2" Mounting Frame for Small DSLR Bodies (Canon 5D M3 Nikon D800/600 type cameras)
Lanyard and Lanyard Hook
Lens Cap, Sun Mask, and protective boot
Z-Finder Dust Cover
Promotions
Pack EOS-C70 + Optique 24-105 F2.8
Canon
CANON RF 24-105/2,8 L IS USM Z + Canon EOS-C70
Buccaneer Pied Wind Up Avenger 3m
Avenger
Avenger Buccaneer Pied Wind Up Avenger 3m
EOS-R5C Caméra Cinema Plein format
Canon
Capteur Plein format 8K, photo 45 megapixels,...
XF605 Camescope 4K
Canon
Caméra puissante Capteur CMOS type 1.0...
HyperDeck Extreme 8K HDR
Blackmagic Design
Le premier enregistreur broadcast 8K offrant un enregistrement en H.265, une interface...
XA75 capteur CMOS 4K 1 pouce zoom 15x stab 5 axes
Canon
Caméscope Canon XA75 professionnel 4K de type...
Q5 color Cinematic LED Light
Fiilex
Température de couleur variable : 2800-10 000K...
Tête HF 2 axes 8kg + focus + télécommande
E-Image
Tête motorisée 3 voies,(pan/tilt/focus), avec télécommande, jusqu'à 8kg de charge Le...
EOS 5D Mark IV Appareil plein format
Canon
Le CANON 5D Mark IV se réinvente et affirme sa...
XA70 capteur CMOS 4K 1 pouce zoom 15x stab 5 axes
Canon
Un caméscope professionnel 4K de type CMOS 1,0...
AV PRO CFexpress XT MK2 Type B 1320GB
Angelbird
AV PRO CFexpress XT MK2 Type B 1320GB
AV PRO CFexpress MK2 Type B 4TB
Angelbird
AV PRO CFexpress MK2 Type B 4TB
XA65 Camescope professionnel 4K
Canon
Un caméscope professionnel 4K à capteur CMOS de...
DMW YAGHE Boîtier Grip Pro Audio.Video
Panasonic
Boîtier Grip Pro Audio.Video pour Appareil photo GH4
RM-LP100E - Pupitre controle caméras
JVC
Pupitre contrôle caméras KY-PZ100XX Ecran tactile de 7 pouces (diagonale) pour les...
XA60 Camescope professionnel 4K
Canon
Un caméscope professionnel 4K à capteur CMOS de...
ED360M E-Image - Kit complet travelling
E-Image
Kit complet de travelling comprenant 1x Kit ED360 + 1 Magic Motor 2 ( kit de...
PTZ20X G1 - Zoom X20 - 58.7°
PBS
Camera Tourelle PTZ20X G1 Streaming direct et régie multi-cameras Zoom optique x20...
PTZ 1080P - Zoom X12 - 72.5°
PBS
Camera Tourelle PTZ Full HD 1080P 50/60 Streaming direct et régie multi-cameras...
Camera PTZ Full HD Zoom optique x20 capteur Sony SDI-HDMI encodeur stream
PBS
PTZ Full HD 3G SDI /HDMI/USB, zoom optique X20
AV PRO CFexpress MK2 Type B 2TB
Angelbird
AV PRO CFexpress MK2 Type B 2TB
AV PRO CFexpress XT MK2 Type B 660GB
Angelbird
AV PRO CFexpress XT MK2 Type B 660GB
Motorisation HF pour Slider EImage
E-Image
Moteur + adaptateur MP01 pour Slider E-Image ES70/ES90/ES120. contrôlez votre slider en...
Motorisation HF pour traveling ED360
E-Image
Motorisation pour Travelling ED360 Contrôlez votre travelling sans fil via votre...
LEGRIA HF G70 Caméscope 4K CMOS de type 1/2,3
Canon
Filmez comme un pro avec ce caméscope 4K CMOS...
PTZJOY5 Pupitre de commande PTZ Visca IP, VISA, PELCO
PBS
Contrôleur caméra PTZ Compatibilité multimarque ; Protocoles PELCO-D, PELCO-P , Sony...
GH10 - Tête fluide
E-Image
Tête fluide, bol 75mm, 3 niveaux de fluidité horizontale et verticale, 7 niveaux de...
25 mm F0.95 Type II Nokton Micro 4/3
Voigtländer
Objectif Voigtländer 25mm f/0.95 Nokton II...
S-1073F Moniteur 7" FHD Waveform LCD Monitor
Swit
Moniteur 7" FHD Waveform LCD Monitor Platine de batterie non incluse