Tilta Nucleus Nano - WLC-T04

Nucleus-Nano: Wireless Lens Control System
The Nucleus-Nano is a revolutionary wireless lens control system specifically designed for handheld gimbal systems. It makes it possible for a single operator to control a lens gear while simultaneously operating their gimbal. The Nano system is compatible with all DSLR, mirrorless, and modified "cine-style" vintage photo lenses.


Wireless Lens Focus Control Motor
Wireless Hand Wheel Focus Controller
Up to 300' Range
5 to 18V, 0.65 to 1Nm Torque Motor
0.8 MOD Standard Cine Gear, Gear Rings
Control Run/Stop, A-B Limits
Rosewood-Lined Hand Wheel
Multiple Mounting Options Included
Includes Hardware, Batteries, USB Cable


The Nano Hand Wheel Controller has a compact knob design similar to professional follow focus hand units (the design is very similar to the Tilta Nucleus-M hand unit's focus wheel). The Nano Hand Wheel Controller has no delay. It is highly responsive, wireless, and accurate. It is powered via a single 14500 rechargeable battery (which is included in the kit) and yields a 6 hour operating time.

When used in conjunction with the Tiltamax Gravity G2X Compact Handheld Gimbal, simple single-handed operation is possible by mounting the controller unit to the gimbal body's rosette connection. Easily toggle between the G2X's modes and pull focus at the same time!

What's included
(1) Nucleus-Nano Hand Wheel Controller
(1) Nucleus-Nano Wireless Follow Focus Motor
(1) 15mm Single Rod Mounting Baseplate For 95mm Lens
(2) 1/4"-20 Hex Screws
(2) Rod Mount Hex Screw
(1) 15mm x 100mm Black Aluminum Rod
(1) 31cm 5V Micro USB male to 5V Micro USB male motor power cable
(2) Photographic lens follow focus gear rings
(1) Nucleus-Nano Hand Wheel Attachment Plate for Ronin-S/G2x
(1) Nucleus-Nano Hand Wheel Attachment Adapter for Zhiyun Crane
(1) 14500 Dual Battery Wall Charger
(2) 14500 Batteries
(1) M4 Allen key
(1) M6 Allen key
(1) User Guide

The motor has a 5-18V input tolerance for power via a Micro USB port. This allows the motor's power to be drawn from the G2X tilt motor's 5V Micro USB output or via a P-tap to 5V Micro USB cable (sold separately).