The Tilta Float System works in conjunction with the DJI RS 2 or RS 3 gimbal to provide a small, compact camera stabilizer system to allow you to accomplish smooth cinematic camera movements with smaller camera setups. The counterweight-based post provides further stabilization for your setup beyond what the gimbal is already doing to allow for the smoothest possible free flowing camera movement imaginable. Also, the spring-loaded arm and support vest design puts the weight of the rig onto your torso, allowing for longer operating times before the user gets fatigued.

Designed for the DJI RS 2 and RS 3 Gimbal
Stabilizer Arm with Support Vest
Easy Assembly and Transport
Wireless Thumb Controller and Receiver
V-Mount Battery Plate
Smartphone and Monitor Brackets
Easy High and Low Modes


Tilta Float System compatible with DSLR's and Mirrorless' gimbal with remote control.
For example:

DJI : Ronins RS2

Feiyu : Ak4500

Moza : Air AirCross

Zhiyun : CRANE series

Payload is 1.5KG-7.5KG.

There are 4 power supply solutions:

1: V lock battery
2: Gold mount battery
3: DJI TB50 Battery
4: Original RS2 Battery handle


A DESIGN WITH COMPATIBILITY
Wide Range of Usage

Pairing with a gimbal is all you need in order to achieve all of the operating needs of the industry's newest stabilizer systems. You can easily switch between high and low modes.
Compact and Portable

When compared to the traditional Steadicam system, the Tilta Float System is built with carbon fiber and lightweight aluminum materials. The camera operator no longer needs to travel with heavy ooperating equipment. It sets your body free from the burden and extends the duration of operation.

This compact and inexpensive stabilizer system is quick and easy to assemble, pack, and transport.

Highly modular and detachable design. Each components can be purchased individually.


Packing list :


(1) Tilta Flow System Arm (GSS-T01-ARM)
(1) Tilta Flow System Post (GSS-T01-PST)
(1) Power Supply Base Plate for RS 2 (TGA-PBP) with Cable (TCB-DTP-2LE-40)
(1) Tilta Float System V Mount Battery Plate (GSS-T01-BPV)
(1) 2-Pin Lemo to 2-Pin Lemo Cable (20 cm) (TCB-2LE-2LE-20)
(1) Tilta Float System Support Vest (GSS-T01-SV)
(1) Wireless Thumb Controller for RS 2 (GSS-T01-WTC)
(1) Wireless Control Receiver Module for RS 2 (TGA-WCR)
(1) Tilta Float System Monitor Bracket (GSS-T01-MB)
(1) Tilta Float System Carrying Case (GSS-T01-CC)
(1) Tiltaing Adjustable Cold Shoe Phone Mounting Bracket (TA-PMB-B)
(1) Tool Kit for Tilta Float System (GSS-T01-TK)
(1) Tilta Float System Cross NATO Rail Post Mount(GSS-T01-CPM)
(1) Tilta Float System Baby Pin Docking Adapter(GSS-T01-PDA)



Tilta Float System Specs

Product dimensions: 835x345x210mm
Product weight: 10kg (Net Weight 7.5kg)
Materials: Carbon fiber, aluminum, plastic, and nylon fabric

Tilta Float System Support Vest
Vest Size: 600-1200mm
Extension: Built-in Tilta standard 15mm quick release baseplate.

Tilta Float System Arm
Connector post diameter: 12mm
Maximum payload capacity: 10kg
Up and down movement range: 800mm (±4300)

Tilta Float System Post
Material: Carbon fiber and aluminum
Mount: NATO rail
Power input/output: 2-pin LEMO
Length range: 500-1000mm
Tilta Wireless Thumb Controller for RS2 and RS3

2.4 GHz wireless module
Remote control range: 50-70m (Dependent on the location, there might be a slight variance.)

Power Supply Solutions
1. V-mount battery
2. Gold mount battery
3. DJI TB50 battery
4. RS2 battery grip