Sachtler 18-S2-SL-HD-MCF Système

The Video 18 S2 Fluid Head System from Sachtler can handle a payload from 4 to 48 lb. It includes a Video 18 S2 fluid head, a Speed-Lock CF HD tripod, and a mid-level spreader. For firm and stable grip on flat surfaces, the system comes with three rubber feet. The included ENG/EFP padded bag protects your tripod system during transportation and storage.

Video 18 S2 Fluid Head
Able to handle DSLR setups weighing four pounds up to ENG and digital cinema cameras weighing 40 pounds, the Sachtler Video 18 S2 Fluid Head can fit into a wide range of video productions. Sixteen steps of counterbalance and seven steps of pan and tilt drag, along with locks for each axis, let you easily customize the response of the Video 18 S2 to fit your application, be it studio or field production.

The top of the Video 18 S2 head is dominated by a sliding balance platform which accepts Sachtler's convenient Touch & Go quick release camera plate. Once the plate is secured, the entire platform adjusts to balance your camera setup. At the front of the platform, parking spaces for 1/4"-20, 3/8"-16, and registration pin screws are available for when they are not being used. Both sides of the head feature rosette mounts for pan handles. A right-side pan handle is included with the Video 18 S2. The base of the head terminates in a 100mm bowl mount for coupling with industry standard tripods, jibs, sliders, or other grip equipment that feature 100mm bowls.

Speed-Lock CF HD Carbon Fiber HD Tripod Legs
The Speed Lock CF HD heavy-duty tripod with a weight of 9.2 lb, has all the same features as the Speed Lock CF, plus it adds an amazing high load capacity of 211 lb for additional strength.

It takes just three quick movements and the Speed Lock CF HD is ready for action - and users don't even have to bend over! The patented clamping system lets you adjust the tripod smoothly and safely, even with a camera mounted. The Speed Lock CF's carbon fiber construction ensures minimal load-free weight, and increases stability and twist resistance. On top of that, the clamping connection forms a third tube to further increase stability. The ergonomically shaped, high-tech clamps have a rounded design, which ensures that cables slide off without catching. In addition, you can tell at a glance whether the legs are clamped into position. And of course, it's compatible with all existing 100-mm accessories.

• Carbon Fiber construction
• 100mm / 4" bowl base
• Double extension design
• Maximum height of 62.9-inch
• Quick clamping system, locks tripod legs in seconds
• Supports up to 211 lb.

Mid-Level Tripod Spreader
A Mid-Level Spreader is chosen when shooting is often performed on uneven surfaces, such as steps, rocky ground, slopes. It allows for rapid set-up and pull down by keeping tripod legs at an equal or preset distance relative to each other. Attaches to the center bracket of a tripod and its arms are telescopic to allow extension of a tripod leg without detaching the spreader. Fits all 100mm, 150mm bowl, (except short tripods) OB-2000M, Cine 2000 and Cine 2000 Medium tripods.

Rubber Feet (Set of 3)
Set of three Sachtler Rubber Feet. Snap these feet onto your tripod when it's not possible to use the dual spiked feet, ideal on slippery and glossy floors. For all Tripods with Off-Ground Spreaders (Except OB-2000/M and Cine 2000/M tripods).

ENG/EFP Padded Bag
The Sachtler ENG/EFP Padded Bag is a soft tripod bag designed to carry various Sachtler tripods with fluid heads up to 37 inches long. The case can be carried by the interlocking handles or the attached shoulder strap.

• Soft padded tripod carry bag
• Carried by interlocking handles or attached shoulder strap

Compatible with :

• Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on 100 mm long, 100 HD, Hot Pod tripods
• Sachtler DV 8 with 100mm ball, DV 12, DV 15, Video 15, Video 18, Video 20 fluid heads on ENG 2 HD, Speed Lock CF HD tripods
• Sachtler Horizon Plus and Video 25 Plus fluid heads on 2-fold extension EFP 2 tripods