Hollyland kit LARK M2 Combo Hollyland

Hollyland

kit LARK M2 Combo Hollyland

  • Plug and Play
  • 40 Hours
  • Battery Life
  • Button Size
  • Knob Control
  • Hi-Fi Sound
  • 48 kHz/24-bit
  • Quiet the Noise
  • Universal Compatibility

Ref : LARKM2-COMBO

Plus de détails

209,98 € TTC 209.98
174,98 € HT
  • Plug and Play
  • 40 Hours
  • Battery Life
  • Button Size
  • Knob Control
  • Hi-Fi Sound
  • 48 kHz/24-bit
  • Quiet the Noise
  • Universal Compatibility


LARK M2 is a lightweight wireless microphone weighing only 9 grams. It is perfect for vloggers, podcasters, filmmakers, and others who want to effortlessly record professional audio for their videos. With lossless sound reproduction and a 40-hour[1] battery life, it delivers high-quality uninterrupted audio recording every time.
Take a Closer Look

Incredibly Small

At only 9g, the transmitter (TX) is small enough to stay securely fastened to your clothing without any drooping or sagging. Its button-size design is practical, convenient and doesn't compromise audio quality.


Versatile Wearing Options

Wearing LARK M2 is super easy! You can attach it with a magnet, clip it on, or try the cool new necklace.

Powerful Recording Performance


48 kHz/24-bit High Fidelity Audio


High SNR 70 dB

With a high signal-to-noise ratio (SNR) of 70 dB, LARK M2 can produce clearer, polished recordings with a low noise floor.


Precise Noise Cancellation Capture Your True Sound


LARK M2 uses Environmental Noise Cancellation (ENC) technology to precisely minimize noise across frequencies, preserving original voices with crystal clear clarity and full-toned richness.

40 Hours Long Battery Life

Unleash Your Creativity Create More


Record for up to 10 hours on a single TX charge. The portable case efficiently charges the whole set in less than 1.5 hours, delivering an impressive total battery life of approximately 40 hours.

  • 40 Hours = Battery Life
  • Two = Full Charges
  • 10 Hours = Working Time
  • <1.5 Hours = Charging Time

Capture Clear Sound Anywhere

  • 300m (1000ft)
  • Stable Transmission


LARK M2 is equipped with an advanced high-gain Laser Direct Structuring (LDS) antenna for stable audio transmission, free from human body interference. With an impressive range of up to 300m (1000ft)[2], capturing your voice loud and clear in challenging, long-distance recording environments is not hard anymore.


Dual Anti-Interference


Noise-Free and Stable Wireless Transmission


The LARK M2 is engineered to deliver outstanding audio performance. It features a specially designed metallic mesh that effectively protects against dust and various interferences, including 2.4G wireless, infrared, and radio frequency interferences (RFI). As a result, your audio is always pristine and free from any unwanted sounds.

Easily Work with All Your Devices


LARK M2 is compatible with a wide range of devices. The Lightning plug has an MFi-certified Apple chip, and the USB-C plug connects with Android phones, Apple 15, action cameras, and computers. The 3.5mm TRS to TRS cable connects LARK M2 with DSLRs or mirrorless cameras.

  • Lightning
  • USB-C
  • Camera
  • Computer


Instant Playback through Phone Speaker


When the RX is connected to your phone, you can playback your recordings directly without the need to unplug.

Simple Control Video Recording


Pressing the Noise-Cancellation button twice on the TX allows you to remotely control your phone to start or stop video recording or take photos. This feature allows you to capture important moments in time.

Auto Pairing

LARK M2 is pre-paired at the factory, so you won't have to deal with any complex setup procedures.

Specifications

Mic Sensitivity : -37 dBV ± 2dB @ 1 KHz, 94dB SPL

Wireless Modulation Mode : GFSK 2 Mbps

Wireless Transmission : 2.4 GHz Adaptive Frequency Hopping (AFH)

Transmission Rang : Mobile Version: Up to 1000ft (300m) for LOS/200ft (60m) for NLOS / Camera Version: Up to 1000ft (300m) for LOS/130ft (40m) for NLOS
   

Mic Polar Pattern : Omnidirectional

Frequency Response : 20 Hz–20 kHz

Signal-to-Noise Ratio : > 70dB

Sound Pressure Level : 115dB SPL

Bit Depth : 24-bit

Sample Rate : 48 kHz

Battery Voltage

    TX: 3.87V
    Camera Version RX: 3.87V
    Mobile Version Charging Case: 3.8V
    Camera Version Charging Case: 3.8V

Battery Capacity

    TX: 97 mAh
    Camera Version RX: 145 mAh
    Mobile Version Charging Case: 750 mAh
    Camera Version Charging Case: 1950 mAh

Operating Time

    TX: About 10 hours
    Camera Version RX: About 9 hours
    Mobile Version Charging Case: > 2 times charging for 2 TX at the same time
    Camera Version Charging Case: > 3 times charging for all TX and RX at the same time

Charging Time

    TX: About 1.5 hours
    Camera Version RX: About 1.5 hours
    Mobile Version Charging Case: < 1.5 hours
    Camera Version Charging Case: < 2 hours

Charging Temperature : 0° C to 45° C
  
Operating Temperature : –10° C to 45° C

Dimensions

    TX: Approx. D26mm x 9.9mm (1.0” x 0.4”)
    Mobile Version RX: Approx. 40mm x 16.5mm x 9mm (1.6” x 0.6” x 0.4”)
    Camera Version RX: Approx. 40mm x 25.7mm x 20.5mm (1.6” x 1.0” x 0.8”)
    Mobile Version Charging Case: Approx. 75.8mm x 49.8mm x 35mm (3.0” x 2.0” x 1.4”)
    Camera Version Charging Case: Approx. 86mm x 54mm x 39mm (3.4” x 2.1” x 1.5”)

Weight

    TX: Approx. 9g (0.3oz)
    Mobile Version RX: Approx. 6g (0.2oz)
    Camera Version RX: Approx. 14.8g (0.5oz)
    Mobile Version Charging Case: Approx. 65.6g (2.3oz)
    Camera Version Charging Case: Approx. 111g (3.9oz)

Note:

The camera version has a battery life of 40 hours, while the mobile version has a battery life of 30 hours with the charging case.
Mobile Version: Wireless transmission can reach up to 1000ft (300m) for line-of-sight (LOS) and 197ft (60m) for non-LOS (NLOS).Camera Version: Wireless transmission can reach up to 1000ft (300m) for line-of-sight (LOS) and 131ft (40m) for non-LOS (NLOS).
Playback without the need to unplug function is not supported when connecting the camera version RX to a camera.
TX Control Video Recording function is only possible with phones that allow starting and ending video recording or taking photos with a single volume button press.
Simply unbox the package, remove the insulating film, and place it back in the charging case, TX and RX will automatically pair, and you can begin recording without any delays.
The camera version RX only supports switching between mono and stereo modes when the 3.5mm audio jack is connected to a camera.

  • USB-A to USB-C Cable x1
  • TX Windscreen x2
  • LARK M2 Necklace Silicone case x2
  • Transmitter
  • Camera Version Receiver
  • Lightning Plug Receiver
  • USB-C Plug Receiver
  • Camera Version Charging Case
  • Mobile Version Charging Case
  • USB-A to USB-C Cable
  • TX Windscreen (White)
  • TX Windscreen (Black)
  • LARK M2 Necklace Silicone case
  • Clip Magnet (White)
  • Clip Magnet (Black)
  • TRS-to-USB-C
  • Back Clip (White)
  • Back Clip (Black)
  • USB-C to USB-C Cable
  • USB-C to Lightning Cable
  • Transmitter Magnetic Charging Cable
  • Adjustable Magnet Necklace
  • 3.5mm TRS to 3.5mm TRS Cable (Camera)
  • 3.5-TRS-TO-3.5-TRRS
  • Transmitter Sticker