Sachtler PTZ Tripod System with Tripod Dolly, Aluminum (26.5 lb Payload) - Black

Mount your PTZ camera, weighing up to 26.5 lb, on a sturdy yet portable moving tripod platform designed to support your camera without wobble or vibration with the Sachtler PTZ Tripod System with Tripod Dolly.
This bundle includes a two-stage aluminum tripod that supports up to 44 lb (20 kg), half ball adapter with a tie-down knob, PTZ camera plate, and rolling tripod dolly with independent wheel locks.

The tripod system is ideal for setting up on location and removing after the event is over or in a studio as a movable camera position.
The setup is for use on flat surfaces where you need to be able to quickly reposition your PTZ camera by simply unlocking the wheels, rolling to a new position, and relocking the wheels once you've set your new position.

° Sachtler 75/2 Aluminum Tripod (75mm)
A solid and strong set of legs, the 2-stage Sachtler 75/2 Aluminum Tripod with 75mm bowl supports up to 44 lb (20 kg) and is well suited for camcorders and DSLRs to smaller digital cine cameras.
This tripod does not include separately available spreaders or rubber feet.
The legs feature a working height range of 16.6 to 61.8" when using a ground spreader (not included), providing you with a range of shot heights without having to use specialty legs.

Each leg is independently adjustable in height and angle, allowing you to quickly rough in your position.
The adjustments allow the tripod legs to work in oddly shaped spaces and remain stable on uneven surfaces.
The lever locks are durable and lock the leg heights quickly and securely.
The tripod legs can be used by themselves on soft ground or with optional rubber feet, a mid-level spreader, or a ground spreader.
- The legs feature independent height adjustments and spread, which allow the legs to remain stable on rough terrain and uneven surfaces such as stairs.
- The dual spiked feet provide a firm grip on soft surfaces, such as earth or sand, when the legs are at a normal height or when you need to spread them wide for low-angle shots.

° Sachtler Tie-Down Knob for Ace & 75mm Heads
The Sachtler Tie-Down Knob is used to secure an Ace or any 75mm ball head to a compatible tripod or hi-hat.
This tie-down features a long, triangular grip.
Compatibility: 75mm tripod heads including Sachtler Ace models

° Vinten PTZ and Prompter Plate
The Sachtler and Vinten PTZ accessory plates are designed for simple mounting of a PTZ camera to the widest range of tripods and pedestals.
Simply select the correct plate and interface for your chosen camera support Any PTZ camera where the tapped mounting holes on the underside are in line with the lens centre of the camera.
To fit to the bottom of a prompter bracket when the PTZ is mounted to a prompter.

° Sachtler Dolly 75 for DA-75L, DA-75/2D, and Pedestal C I Tripods
The Dolly 75 from Sachtler provides smooth and stable dolly action for all 75mm tripods.
It features independent wheel locks and a collapsed length of only 25".
The ergonomically designed carry handle is molded into the dolly's reinforced center bracket for optimum carriage strength.

Sachtler 75/2 Aluminum Tripod (75mm)
General
Head Mount Type: 75 mm Bowl
Maximum Working Height: 61.8" / 156.97 cm (with Spreader)
Minimum Working Height: 16.5" / 41.9 cm (with Spreader)
Closed Length: 27.3" / 69.3 cm
Materials: Aluminum
Weight: 5.28 lb / 2.39 kg

Legs
Leg Lock Type: Rotating Locking Lever
Independent Leg Spread: Yes
Leg Sections: 3
Feet Features: Dual Spiked
Spreader: Mid-Level, Ground (Not Included)

Sachtler Tie-Down Knob for Ace & 75mm Heads
Compatible Tripod Heads : 75 mm

Sachtler Dolly 75 for DA-75L, DA-75/2D, and Pedestal C I Tripods
Tripod Foot Compatibility: Spiked Feet
Working Footprint: 32" / 81.3 cm
Adjustable Footprint: No
Load Capacity: 88 lb / 39.9 kg
Closed Length: 25" / 63.5 cm
Locking Wheels: Yes
Wheel Diameter: 4" / 10.2 cm
Cable Guards: No
Material: Aluminum
Weight: 9.7 lb / 4.4 kg