Flowcine SERENE - Flowcine pending two axis spring arm.

The Serene is a patent pending two axis spring arm that attaches at the end of the Easyrig (2/2.5/3 or Vario5) arm. It stabilises vibrations and motion errors on the vertical axis that comes from walking or running with the rig. It also stabilises side to side errors in the same scenarios by counter pivoting around it's center axis. At the same time you have full use of the Easyrig cord extension that will allow you to go from high to low mode while at the same time the Serene will take care of the vertical and side to side stabilisation adding two more stabilised axis to your existing system.

The Serene can take camera setups between 6-19.5 kg, and you can easily fine tune the spring tension without tool. Of course it works great with the Gravity One, but it also works really well for other gimbal rigs like the Freefly MoVI, DJI Ronin, Letus Helix and most other leading gimbal rigs.

Max load : 19.5kg / 43lbs
Min load: 6kg / 13lbs
Weight : 1265g
Material : Aluminium, Carbon Steel, Stainless Steel, EPDM rubber