Revolution head 2 + telecommande oracle

Kessler Crane

Tête motorisée Revolution head 2 + telecommande oracle

Plus de détails

En achetant ce produit vous pouvez gagner jusqu'à 276 points totLoyaltyAdvance. Votre panier totalisera 276 points qui peut être converti en un bon de réduction de 41,40 €.


2 302,03 € HT

2 762,44 € TTC

276 PBS

Ajouter à ma liste

En achetant ce produit vous pouvez gagner jusqu'à 276 points totLoyaltyAdvance. Votre panier totalisera 276 points qui peut être converti en un bon de réduction de 41,40 €.


Revolution head 2 + telecommande oracle - Kessler crane -Tête motorisée Revolution head 2 Pan et Tilt, extrême fluidité grâce a une transmission par courroie et double moteurs par axe offrant une meilleure linéarité du mouvement + Controleur Oracle pour tete Kessler revolution ou pour memorisation de mouvements pour les sliders Kessler

Revolution Head 2 

Originally, when we designed version one of this product, it was to be used in the underslung position on cranes. However, because of the ability to use it for shooting a time-lapse, people started to use it in the over-slung position. In this position, the centre of gravity is higher. This forces you to ensure your base is secure because as your setup gets higher, the more unstable it becomes. 

In order to make the head more suitable for shooting in the over-slung position, we have made a few modifications. The first thing that we have changed is the motor position. The Pan axis motors are now inverted, which enabled us to lower the mounting area by 3.75" to 1.75". If you are wanting it even lower and do not need the cables to pass through, you can lower it to a 1/4" by removing the stand offs. To do this, you need to remove the four screws on the base plate and then remove the four screws on the mounting plates. Once you have done this, you can attach the base plate directly to the column on the head to achieve the 1/4" configuration. 
Another modification we made is an adjustable Tilt support arm so you can lower the camera platform by 4". There are 5 different heights you can choose between using the available lock pockets. This helps you fine tune the height you desire.To lower, simply loosen the screw on the tilt arm and fine tune the height. 
In its lowest configuration, it is about 8" shorter than the height of version one, which is almost half the height of version one. However, if you are wanting to have access to the original size, if you are using a larger setup, such as a long lens or matte box, you simply loosen the screw and adjust to the height you desire. By raising the height, you can gain access to more movement if desired when shooting with a larger camera configuration. 
 For example, when a stripped down DSLR is attached you have full access to the movement. However, when you attach a matte box, you will need to raise the head to achieve the clearance height needed. 
One great feature of this system is the ability to order either the 500 series motor or 1000 series motor. The standard motor is the 500 series and is what has been used with version one of the head. It is a good all around motor, however, if you are either shooting on a long lens or primarily shooting time-lapse, you may want to look at getting the 1000 series motor. Basically, the difference is that the 1000 goes half the speed with twice as much torque as the 500. This allows you to do very precise moves. 
 There are a few different mounting options. The first is to use the Kwik Release System. The second is to mount directly to your sliders and cranes. Use the bolts provided in each case. For the CineSlider, use the four screws included with CineSlider . To mount to the KC-Cranes, use the bolts and wing-nuts provided with the Rev 2. You can also use a ball mount to attach it as well. You can then mount the head to anything with a ball mount, such as a tripod, Pocket Jib or Shuttle Pod.
 

Oracle Controller - Controleur Kesslercrane Oracle

Le système de contrôle ORACLE est au cœur de la gamme de produits elektraDRIVE.

Le système de contrôle ORACLE est interchangeable entre les multiples produits, comme notre REVOLUTION Pan/Tilt système, les moteurs elektraDRIVE pour
l'CineSlider & Pocket Dolly.

REMARQUE: Vous pouvez utiliser la fonction TILT et SLIDER de façon indépendante avec le même contrôleur.
Jusqu'à ce que nous ayons à disposition une "boîte de crossover" vous ne serez pas en mesure d'accéder à la fonction PAN tout en utilisant le curseur.

Câblage CAT5 / CAT6 câble avec connecteurs RJ45 (câble réseau standard).
Propulsé par alimentation standard CA avec prise murale, ou en option adaptateur 12V DC et la batterie.

  • 1x ORACLE contrôleur (v2.06.2SL w / SmartLapse)
  • 1x 100v-240v entrée (50-60Hz, 1.4A) Alimentation AC w / Amérique du Nord Mur Plug.
  • 1x 25ft câble CAT5
 

Revolution Head Time Lapse Tips for ORACLE in Advance Mode

Here are some approximate figures to use as a starting point. These figures where populated with a Canon 7d equipped with an extended battery grip and 15mm lens.

Using these figures should get you close to the reported result but you may need to adjust the motor off time to adjust movement over time to your exact expected result.

Being the load on the pan always remains the same you will find very little variation once you have established the common result to your unit. A few tips.

1. Try to get your camera as close to perfect center of gravity that is balance up and down as well as forward to back.

2. Always leave your 'Motor on' time to ".05" and your 'Motor Speed' to "50" and make your distance over time adjustments by lengthening or shortening the 'Motor Off' time.

PAN:
Keep 'Motor On' to ".05" & 'Motor Speed' to "50" and run your cycles to cover the time you want the TL to take (i.e. If you want a 60 min TL, run the cycles up to a number that the Oracle says will last 60 min).

degrees of movement over | time period / motor off time (mo=motor off)

22.5 degrees over | 30min/mo 4sec | 1hr/ mo 8sec | 2hr/ mo 16sec | 4hr/ mo 32sec

45 degrees over | 30min/mo 2sec | 1hr/ mo 4sec | 2hr/ mo 8sec | 4hr/ mo 16sec

90 degrees over | 30min/mo 1sec | 1hr/ mo 2sec | 2hr/ mo 4sec | 4hr/ mo 8sec

180 degrees over | 30min/mo .5sec | 1hr/ mo 1sec | 2hr/ mo 2sec | 4hr/ mo 4sec


TILT:
Keep 'Motor On' to ".05" & 'Motor Speed' to "50" and run your cycles to cover the time you want the TL to take (i.e. If you want a 60 min TL, run the cycles up to a number that the Oracle says will last 60 min).

These figures where populated with an Canon 7d equipped with a extended battery grip and 15mm lens. This camera set up is approximately 50% below center of gravity so if you where to have the camera raised to be on perfect center of gravity you will use the same figures as the pan above.

degrees of movement over | time period / motor off time (mo=motor off)

22.5 degrees over | 30min/mo 2sec | 1hr/ mo 4sec | 2hr/ mo 8sec | 4hr/ mo 16sec

45 degrees over | 30min/mo 1sec | 1hr/ mo 2sec | 2hr/ mo 4sec | 4hr/ mo 8sec

90 degrees over | 30min/mo .5sec | 1hr/ mo 1sec | 2hr/ mo 2sec | 4hr/ mo 4sec

180 degrees over | 30min/mo .25sec | 1hr/ mo .5sec | 2hr/ mo 1sec | 4hr/ mo 2sec

Once you have tried one of these settings it is a good idea to write down your result if it is different than what the chart has stated so you can adjust or repeat this move next time.

You may also tweak the Motor Speed settings to fine tune the results. For example if your 'Motor Speed' is "50" and you expect your move to go 90 degrees over a period, and it actually goes 95 degrees you can reduce the 'Motor Speed' to say "45", so each movement is slightly slower. We do not recommend setting the Motor Speed over "50" when using long exposures.

  • Limitée au stock
    Kessler Crane
    Hors Stock
    1 632,32 € TTC
    1 360,27 € HT

    Tête motorisée Revolution head 2 Pan et Tilt, extrême fluidité grâce a une transmission par courroie et double moteurs par axe offrant une meilleure linéarité du mouvement Tête motorisée Revolution head 2 Pan...

Donnez votre avis

Revolution head 2 + telecommande oracle

Revolution head 2 + telecommande oracle

Tête motorisée Revolution head 2 + telecommande oracle

Donnez votre avis

Promotions

25 autres produits dans la même catégorie :

Scroll To Top