BP4071 View larger

BP4071

Audio Technica

Gradient condenser microphone, 395 mm long

More details

 
1 100.52 € tax inc
917,10 € tax excl
110
PBS points
Out of stock - Usually available within 5 days

BP4071 AUDIO TECHNICA - Gradient condenser microphone, 395 mm long

With directivity equal to mics up to 50% longer, the BP4071 has been specially created to meet the pickup demands of broadcasting, film/TV sound, professional recording, wildlife recording and theater sound reinforcement. Particularly useful for miking dynamic action in film/TV audio as well as in 'spot' miking techniques in the music studio or theater, the 15.55"-long BP4071 provides a low noise floor and direct-coupled, balanced output for a clean signal even in high-output conditions. Audio-Technica has pioneered an interference tube design in the BP4071 that provides the same directivity as mics up to 50 percent longer.

  • Designed for use in broadcasting, film/TV production, and theater sound reinforcement applications
  • Direct-coupled, balanced output ensures a clean signal even in high-output conditions
  • Innovative acoustic design provides same directivity as mics up to 50% longer
  • Rugged housing made of lightweight structural-grade aluminum alloy
  • Transformerless design for improved pickup of transients
  • Switchable 80 Hz high-pass filter & 10 dB pad
  • RoHS-compliant - free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
  • Element: Externally polarized (DC bias) capacitor
  • Polar Pattern: Line + gradient
  • Frequency Response: 20-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: -29 dB (35.5 mV) re 1V at 1 Pa
  • Impedance: 50 ohms
  • Maximum Input Sound Level: 141 dB SPL, 1 kHz at 1% T.H.D.; 151 dB SPL, with 10 dB pad (nominal)
  • Dynamic Range: 128 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 81 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 48V DC, 4.8 mA typical
  • Weight: 136 g (4.8 oz)
  • Dimensions: 395.0 mm (15.55") long, 21.0 mm (0.83") maximum body diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8145 windscreen; two O-Rings; protective carrying case
X Write a review
BP4071
BP4071
Audio Technica

Gradient condenser microphone, 395 mm long

    Ask a question

    Your question has been successfully submitted to our team.

    Thank you for your interest in our products !

    X Ask a question
    Captcha