AT8015 View larger

AT8015

Audio Technica

Line + Gradient Condenser Microphone 460 mm

More details

 
387.72 € tax inc
323,10 € tax excl
38
PBS points
Out of stock - Usually available within 5 days

AT8015 AUDIO TECHNICA - Line + Gradient Condenser Microphone 460 mm

Designed for video production and broadcast (ENG/EFP) audio acquisition, the AT8015 provides the narrow acceptance angle desirable for long-distance sound pickup, along with excellent sound rejection from the sides and rear of mic. The roll-off position reduces the pickup of low-frequency ambient noise (such as traffic, air-handling systems, etc.), room reverberation and mechanically coupled vibrations.

  • Designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Excellent sound rejection from the sides and rear of mic
  • Switchable low-frequency roll-off
  • Operates on battery or phantom power
  • RoHS compliant - free from all substances specified in the EU directive on hazardous substances

 

http://eu.audio-technica.com/en/resources/40c1b3ba9c42ee06_at8015_polar.jpg

http://eu.audio-technica.com/en/resources/9ebedf6b00baea61_at8015_freq.jpg

  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Line + gradient
  • Frequency Response: 40-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 12 dB/octave
  • Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
  • Impedance: Phantom: 250 ohms Battery: 300 ohms
  • Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 72 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Battery Type: 1.5V AA/UM3
  • Battery Current Life: 0.4 mA / 1200 hours typical (alkaline)
  • Switch: Flat, roll-off
  • Weight: 195 g (6.9 oz)
  • Dimensions: 460.0 mm (18.11") long, 21.0 mm (0.83") diameter
  • Output Connector: Integral 3-pin XLRM-type
  • Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; AT8135 windscreen; battery; protective carrying case
X Write a review
AT8015
AT8015
Audio Technica

Line + Gradient Condenser Microphone 460 mm

    Ask a question

    Your question has been successfully submitted to our team.

    Thank you for your interest in our products !

    X Ask a question
    Captcha