RME Gamme Cartes d'extension
RME
Gamme Cartes d'extension, f. DIGI- & HDSP-Series - Option Synchro Time Code pour HDSP et HDSPe (sauf HDSPe MADI FX)
The TCO module is an optional extension for selected RME cards. Placed in a free slot of the computer chassis the TCO will be connected with the main card via a flat ribbon cable.
The small module provides the HDSPe cards with a Word Clock input and offers a synchronization to LTC and video. Thanks to SteadyClock(TM), the TCO not only extracts absolute positions from LTC, but also a very clean low-jitter word clock from LTC and video. Thus a sample accurate timecode synchronization to audio or video sources is assured.
One single TCO can be used with different HDSP/HDPe cards at the same time (multicard), if connected to a supported card (see graphic).
LTC can be derived and generated in all common formats, i.e. 24, 25, 30, and 29.97 frames; drop-frame or non-dropframe. Commonly used Pull-Up- and Pull-Down formats (+/- 0.1% and +/- 4%) can be utilised, and PAL and NTSC video formats will be automatically detected and processed.
The received Time Code can be sent to the audio or video application as ASIO Positioning Protocol (APP) or MTC. An application can send APP or MTC to the TCO, which will generate LTC on hardware level with lowest jitter (no software/driver routine). Several fly-wheel functions facilitate chase operation (adjustable drop-out length, Continuous- or Jam-Sync).
Under Windows the TCO provides the SMPTE position as APP (ASIO Positioning Protocol) and as MTC Sync. Under Mac OS X the TCO provides the SMPTE position as MTC Sync only.
The TCO has a combined switchable Word Clock/Video input (BNC) as well as an LTC input (BNC). The Word Clock /Video input on the card can comfortably be terminated (relay-controlled) with a 75 Ohm terminator from the settings dialog.
The TCO also features an additional LTC output (BNC) with two level settings (configurable via jumper).
Tech Specs
LTC In
- BNC unbalanced
- Level range: -25 dBu up to +12 dBu
- Video In (Word Clock In)
- BNC switchable termination 75 Ohm
- Format: PAL and NTSC
Word Clock In (Video In)
- BNC, switchable termination 75 Ohm
- Transformer coupled, galvanically isolated input
- Not affected by DC-offsets within the network
- Signal Adaptation Circuit: signal refresh through auto-center and hysteresis
- Overvoltage protection
- Level range: 1.0 Vpp - 5.6 Vpp
- Lock Range: 28 kHz - 200 kHz
- Jitter when synced to input signal: < 1 ns
- Jitter suppression: > 30 dB (2,4 kHz)
LTC Out
- BNC
- Output level: +4 dBu, via Jumper -7 dBu
- Outputs impedance: 220 Ohm
Word Clock Out
- BNC
Max output voltage: 5 Vpp
- Output voltage @ 75 Ohm: 4,0 Vpp
Outputs impedance: 10 Ohm
- Frequency range: 28 kHz - 52 kHz
- Power supply via ribbon cable, 5 V DC, 100 mA
- Standard bracket, dimensions PCB (WxD): 98 x 75 mm
Promotions
Pack Canon 2x CR-N700 et 1x pupitre RC-IP100
Canon
Pack produit composé de 2 caméras CR-N700 et...
Pack Canon 5x CR-N300 et 1x Pupitre RC-IP100
Canon
Pack de 5x caméras PTZ CR-N300N noires et 1...
Pack Canon 3x CR-N500 et 1x Pupitre RC-IP100
Canon
Pack produit composé de 3x CR-N500 et 1x...
Pack Canon 5x CR-N100 et 1x pupitre RC-IP100
Canon
Pack produit comprenant 5x CR-N100 noires et 1x...
EOS-R5C Caméra Cinema Plein format
Canon
Capteur Plein format 8K, photo 45 megapixels,...
XF605 Camescope 4K
Canon
Caméra puissante Capteur CMOS type 1.0...
HyperDeck Extreme 8K HDR
Blackmagic Design
Le premier enregistreur broadcast 8K offrant un enregistrement en H.265, une interface...
XA75 capteur CMOS 4K 1 pouce zoom 15x stab 5 axes
Canon
Caméscope Canon XA75 professionnel 4K de type...
Q5 color Cinematic LED Light
Fiilex
Température de couleur variable : 2800-10 000K...
Tête HF 2 axes 8kg + focus + télécommande
E-Image
Tête motorisée 3 voies,(pan/tilt/focus), avec télécommande, jusqu'à 8kg de charge Le...
EOS 5D Mark IV Appareil plein format
Canon
Le CANON 5D Mark IV se réinvente et affirme sa...
100-400 mm F4.5 5.6L IS II USM monture EF
Canon
Téléobjectif EF 100-400mm f/4.5-5.6L IS USM avec une plage focale 100-400mm, une...
70-200 mm F2.8 L IS III USM monture EF
Canon
70-200 stabilisé, diaph 2.8, lentilles série L Versatile telephoto zoom designed for...
XA70 capteur CMOS 4K 1 pouce zoom 15x stab 5 axes
Canon
Un caméscope professionnel 4K de type CMOS 1,0...
XA65 Camescope professionnel 4K
Canon
Un caméscope professionnel 4K à capteur CMOS de...
DMW YAGHE Boîtier Grip Pro Audio.Video
Panasonic
Boîtier Grip Pro Audio.Video pour Appareil photo GH4
50 mm f1.2L USM monture EF
Canon
050mm f/1.2L USM à monture EF Doté de la plus grande ouverture actuellement disponible...
RM-LP100E - Pupitre controle caméras
JVC
Pupitre contrôle caméras KY-PZ100XX Ecran tactile de 7 pouces (diagonale) pour les...
70-200 mm F4 L IS II USM monture EF
Canon
EF 70-200mm f/4L IS II USM Canon Un téléobjectif portable qui offre des performances...
XA60 Camescope professionnel 4K
Canon
Un caméscope professionnel 4K à capteur CMOS de...
100 mm F.2.8L Macro IS USM monture EF
Canon
100mm f.2.8 Macro Monture Canon EF Serie L avec stabilisateur (IS) objectif de la...
LEGRIA HF G70 Caméscope 4K CMOS de type 1/2,3
Canon
Filmez comme un pro avec ce caméscope 4K CMOS...
24-70 mm F2,8 VC USD DI monture E
Tamron
24-70mm F/2,8 VC USD DI Monture SONY Référence article: A007 Groupes-Lentilles: 12 - 17...
25 mm F0.95 Type II Nokton Micro 4/3
Voigtländer
Objectif Voigtländer 25mm f/0.95 Nokton II...
35mm F1.4 DG HSM monture E
Sigma
ART 35mm F1.4 DG HSM Monture SONY Conçu pour votre reflex numérique plein format...
18-35 mm F1.8 DC HSM monture E
Sigma
Ce zoom standard Sigma 18-35 mm F1,8 DC HSM ART monture Sony pour capteur APS-C est le...
EW100G4-ME2 microphone cravate sans fil
Sennheiser
Ensemble microphone cravate sans fil avec...
S-1073F Moniteur 7" FHD Waveform LCD Monitor
Swit
Moniteur 7" FHD Waveform LCD Monitor Platine de batterie non incluse
EW112P G4 Kit HF avec micro cravate Omnidirectionnel
Sennheiser
Ensemble HF complet avec micro cravate...
24 mm F1.4 ED AS IF UMC monture E
Samyang
24mm F1.4 Monture Sony (full frame) Marque: Samyang Macro: Non Rapport macro: 1:1: Non...